Many friends don't know much about cable bridge. They often ask us if wires and cables can be laid on the same bridge at the same time. To solve this problem, the cable bridge manufacturer introduces:

　　電線與電纜的關系:

　　Relationship between wires and cables:

　　直徑小，結構簡單稱為“線”;大直徑和復雜的結構被稱為“電纜”。

　　Small diameter and simple structure are called "wires"; large diameter and complex structure are called "cables".

　　通常在日常生活中家庭裝修用布用電的是電線，電纜一般用于建筑工程，大量的輸電工程，又稱“電力電纜”

　　In our daily life, wires and cables are usually used for household decoration, and a large number of power transmission projects, also known as "power cables"

　　例如“電線和電纜可以放在同一個電纜橋架上嗎?”這個問題，電橋廠家說可以，但不建議我們這樣操作。

　　For example, "can wires and cables be placed on the same cable bridge?" the bridge manufacturer said yes, but we are not recommended to do so.

　　高電壓與高壓電線電纜敷設在同一橋架,布線必須穿一線(保護管或金屬軟管)安裝在橋后,或添加隔膜分離橋,它的原則應該是單獨的安裝,,畢竟,兩個不同的電纜鎧裝層的保護層表面滿足電擊(本身)的要求,而電線只有一層絕緣層(沒有電擊的要求)不能使用同一橋。

　　High voltage and high voltage wires and cables are laid on the same bridge. The wiring must be installed in the first line (protective pipe or metal hose) behind the bridge, or the diaphragm separation bridge is added. Its principle should be a separate installation. After all, the surface of the protective layer of two different cable armor layers meets the requirements of electric shock (itself), while the same bridge cannot be used for wires with only one layer of insulation layer (without the requirements of electric shock).

　　弱電電線和強電電線或電纜不能敷設在同一橋上，兩者之間的直線距離必須大于30CM。這是弱電必須遵循的準則，它會導致強電流對弱電的信號干擾或強電流泄漏造成的弱電損壞。

　　Weak current wires and strong current wires or cables cannot be laid on the same bridge, and the straight-line distance between them must be greater than 30cm. This is the rule that weak current must follow. It will cause strong current interference to weak current signal or weak current damage caused by strong current leakage.

　　以上是電纜橋架制造商為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://m.12xw.com

　　These are the relevant contents introduced by the cable tray manufacturer. For more information, please visit the website: http://m.12xw.com